Herramientas de usuario

Herramientas del sitio


servidores:mail:mail_system_ubuntu_hardy

Installing a Mail System on Ubuntu Hardy with Postfix, Cyrus and Amavisd-new

Adaptado por Félix Molinuevo, FMSI Sistemas de Informática

Introduction

I wanted to run a complete mail server for my company. I decided to encrypt and authenticate connections for both sending and receiving mail, and to handle receiving mail with IMAP, rather than POP. The final setup can handle large amounts of both incoming and outgoing mail and is easy to use…

Overview

Accounts

I had two basic options when selecting how to handle accounts. Either every valid mail account could be tied to a valid user account on the mail server, or I could set up a backend such as an SQL or LDAP database to handle authentication that wouldn't be tied to the server.

Based on my needs and relatively small number of potential users, I decided to go with mail delivery to local user accounts, while retaining support for virtual domains. This way I can support any domain with an MX record pointing to the mail server, and not just my own domain, but mail will be delivered to and authenticated against SASL user accounts.

Software

Since most of our servers are running Debian Etch, I changed the former howto to reflect the changes. All packages except the SquirrelMail SIEVE plugin are straight out of the Debian package management system.

The software used is:

Installation

Before We Begin

Before installing software make sure the current system is up to date:

aptitude update
aptitude upgrade

At this point everything should be ready to go. The default MTA on debian, Exim, should be uninstalled by apt automatically when postfix is installed. Everything else is probably new software.

Postfix

aptitude install postfix

This installs a postfix system that is ready to be setup for TLS (SSL) encrypted connections. I chose reasonable defaults to the questions the debian installer asks. Anything that needs to be changed can be changed later without much trouble. At this point local delivery probably works, but the system is far from complete. I didn't worry about it at this point, since the way the system will be set up I also need to tie postfix into SASL and IMAP, and probably send it to Spamassassin for filtering as well.

Cyrus SASL and IMAP

Next install all the needed packages from project Cyrus, namely the SASL library, the Cyrus admin and client programs, and the Cyrus IMAP daemon. Although it is available, I will not install the corresponding Cyrus POP3 server. This is an IMAP only setup.

aptitude install libsasl2 libsasl2-modules sasl2-bin
aptitude install cyrus-admin-2.2 cyrus-clients-2.2 cyrus-common-2.2 cyrus-imapd-2.2

Configuration

Start with configuring Cyrus-SASL for authentication in general. Both the SMTP server, postfix, and the IMAP server, Cyrus-IMAP, will authenticate using another piece of daemon software, saslauthd. Saslauthd will handle the actual authentication of users. With this in mind, start first by configuring SASL to authenticate against the system accounts using PAM.

SASL

Edit /etc/default/saslauthd to enable the daemon and set the authentication mechanism.

START=yes
MECHANISMS="sasldb"

If you want to use another authentication mechanism, this is where you would set it. The system here authenticates against SASL accounts, so sasldb is the relevant method.

Testing SASL

Start up the server now to test it.

/etc/init.d/saslauthd start

Now create some user account in SASL:

saslpasswd2 -c username

Then test it.

testsaslauthd -u username -p password

If it works, you should see

0: OK "Success."

as a result. If so, saslauthd works ok. Now shut it back down.

/etc/init.d/saslauthd stop

Finish SASL Configuration

In order Postfix can communicate to SASL and Cyrus (check later configuration), you must mount /var/run/saslauthd and /var/run/cyrus inside the postfix chroot. This can be accomplished by using a bind mount. To implement this, add the following line to /etc/fstab.

/var/run/saslauthd      /var/spool/postfix/var/run/saslauthd    none    rw,bind         0       0
/var/run/cyrus          /var/spool/postfix/var/run/cyrus        none    rw,bind         0       0

Create the directory the mount will reside in as well.

mkdir -p /var/spool/postfix/var/run/saslauthd
mkdir -p /var/spool/postfix/var/run/cyrus

And mount them.

mount /var/spool/postfix/var/run/saslauthd
mount /var/spool/postfix/var/run/cyrus

The same location is now accessable outside the chroot at /var/run/saslauthd and inside the chroot at /var/spool/postfix/var/run/saslauthd (which postfix sees as /var/run/saslauthd). This avoids editing the saslauthd init script, messing with dpkg, and creating symbolic links. The only visible side effect is an extra listing from the df command which doesn't know that the bind mount isn't an actual separate disk.

As an advice, don't change other things related to SASL authentication, as is written in some README.Debian in Postfix package, because we're using another method to make Postfix communicate to SASL.

Postfix

There are a lot of steps necessary to get postfix up and running. It needs to be set up to connect to saslauthd, to use SSL, and to link with cyrus-imapd and Squirrelmail. This section will go over the first stages of configuring postfix, but later sections will cover the other parts.

Edit the file /etc/postfix/main.cf and add the following lines to the file.

# SASL Auth Settings
smtpd_sasl_local_domain =
smtpd_sasl_auth_enable = yes
smtpd_sasl_security_options = noanonymous
broken_sasl_auth_clients = yes
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination

Be sure to have the proper name for your server:

myhostname = host.domain.com

And the proper final destination, relay host and accept mails from your network, if you want it:

mydestination = host, host.domain.com, localhost.localdomain, localhost.localdomain, localhost, whatever.com
relayhost = aaa.bbb.ccc.ddd
mynetworks = 127.0.0.0/8 192.168.1.0/24

If you need SASL authentication on your relayhost/smarthost, add following lines:

# Authentication on smarthost
smtp_sasl_auth_enable = yes
smtp_sasl_security_options =
smtp_sasl_password_maps = hash:/etc/postfix/client_passwords
smtp_sasl_loglevel = 2

If you need this, you should add in /etc/postfix/client_passwords the pair username/password for your relayhost:

relayhost.domain.com           username:password

and later execute postmap to compile such info:

postmap /etc/postfix/client_passwords

Also edit /etc/postfix/sasl/smtpd.conf and put in the lines:

pwcheck_method: saslauthd
mech_list: PLAIN LOGIN

You also need to add postfix to the sasl group:

adduser postfix sasl

Reload postfix and check to see if auth is enabled.

/etc/init.d/postfix reload
telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
220 dev.ev-15.com ESMTP Postfix (Debian/GNU)

Type in EHLO domain.com. If the server responds with something like the following, then authentication is enabled in the server. Then type quit to exit.

250-mail.domain.com
250-PIPELINING
250-SIZE 10240000
250-VRFY
250-ETRN
250-AUTH LOGIN PLAIN
250-AUTH=LOGIN PLAIN
250 8BITMIME

Postfix should now tie authentication into itself using saslauthd. Note that the advertised authentication methods are only PLAIN and LOGIN, both of which are plain text based. To enable one of the shared secret methods, such as CRAM-MD5 or DIGEST-MD5, a different authentication method would need to be used. To avoid delivering these plain passwords over the internet, wrap everything up in an encrypted layer using SSL/TLS.

SSL/TLS

Note: this section is needed for Cyrus IMAP to support SSL.

Certificates are required to use TLS and SSL. There are generally two classes of certificates: self-signed certificates and certificates signed by one of the major certificate authorities. If you need implicitly trusted certificates that you can use and let your customers be comfortable with, you'll probably want to go to a CA and purchase them. With smaller sites and users who understand certficate warnings, self-signed certificates are easy to create and still allow encryption. They will throw up warnings in mail clients and web browsers, but the certificates can usually be permanently accepted by users.

If the primary goal is encryption and the trust issues are not major, then a self-signed certificate is adequate.

Certificate Creation

The following steps will create a new CA, certificate request, and certificate.

Start with making a new CA.

cd /usr/lib/ssl/misc
./CA.pl -newca

Answer the questions as they come with reasonable information. The value for CN (Common Name) should be the hostname of the server that the certificates will be used on.

Now make the server certificate request.

./CA.pl -newreq-nodes

Now sign it

./CA.pl -sign

Copy the files to /etc/ssl/certs

cp -iva newcert.pem /etc/ssl/certs/
cp -iva newreq.pem /etc/ssl/certs/
cp -iva newkey.pem /etc/ssl/certs/
cp -iva demoCA/cacert.pem /etc/ssl/certs/

Add SSL to Postfix

Edit /etc/postfix/main.cf again and add the following lines to the file.

# TLS Information
smtpd_use_tls = yes
#smtpd_tls_auth_only = yes
smtpd_tls_key_file = /etc/ssl/certs/newkey.pem
smtpd_tls_cert_file = /etc/ssl/certs/newcert.pem
smtpd_tls_CAfile = /etc/ssl/certs/cacert.pem
smtpd_tls_loglevel = 3
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
tls_random_source = dev:/dev/urandom

Edit /etc/postfix/master.cf and uncomment the following lines.

tlsmgr     fifo   -  -  n  300   1  tlsmgr
smtps   inet   n  -  n  -  -  smtpd -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
587     inet   n  -  n  -  -  smtpd -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes

This will enable TLS, the smtps port, and the dedicated port 587 for mail submission.

The line #smtpd_tls_auth_only = yes will be uncommented later so that users are required to encrypt their connections. For now though leave it alone until testing is complete. To test, telnet in again, as above, and see if the line 250-STARTTLS is there. If so then TLS should be available.

Cyrus IMAP

This guide uses Cyrus-IMAP, largely because it is high performance, and because of SIEVE server-side filtering. One thing to note about this package is that it takes the “black box” approach to IMAP mail delivery. Mail is never delivered to a user's home folder, but rather to a set of dedicated cyrus folders. If you would rather mail either be delivered to maildirs or mbox files, then the Courier- or UW-IMAP servers would be better choices. Later on SquirrelMail and a plugin to easily edit SIEVE scripts will be installed.

Open the file /etc/cyrus.conf for editing and choose which services to run. Unless POP access is desired, leave only IMAP, secure IMAP, and SIEVE. For extra security turn off IMAP to force users to connect over SSL. Under the SERVICES section, uncomment the line

imaps cmd="imapd -s -U 30" listen="imaps" prefork=0 maxchild=100

and comment out the pop3 lines.

Uncomment following line, in order Squatter can index daily all mailboxes:

# reindex all mailboxes (fulltext) daily
squatter_a      cmd="/usr/sbin/squatter" at=0517

This setup uses LMTP. The default socket set in the file should be fine. The line for sieve should already be uncommented, but check it just to be sure. Everything else in the file can stay the way it was.

Now open the file /etc/imapd.conf. Most of the settings can be left the way they are, but there are a few more to set. As always, read the comments for the various settings in the file. The directive sieveusehomedir should be set to false so that remote sieve management with SquirrelMail will work.

The way this setup is working, the following values should be set:

admins: cyrus
allowplaintext: yes
sasl_mech_list: DIGEST-MD5 CRAM-MD5 PLAIN LOGIN
sasl_pwcheck_method: saslauthd

Notes about sasl_mech_list: DIGEST-MD5 is the best mechanism. CRAM-MD5 is better than PLAIN and LOGIN. The last two are needed just in case.

IMAP and SSL

Set the following values in imapd.conf, leaving the rest alone.

tls_cert_file: /etc/ssl/certs/newcert.pem
tls_key_file: /etc/ssl/certs/newkey.pem
tls_ca_file: /etc/ssl/certs/cacert.pem
tls_ca_path: /etc/ssl/certs

Finish Cyrus Setup

Change ownership of files inside /var/lib/cyrus and /var/spool/cyrus:

chown -R cyrus: /var/lib/cyrus/*
chown -R cyrus: /var/spool/cyrus/*

Restart cyrus.

/etc/init.d/cyrus2.2 restart

Then, start saslauthd again.

/etc/init.d/saslauthd start

The way things are set up, only the cyrus user can administer the cyrus server. Set a password for the user cyrus and then su to the cyrus user.

passwd cyrus
su cyrus

You should create the user cyrus in SASL, too:

saslpasswd2 -c cyrus

Now add an IMAP user. Usernames are prefaced with user., followed by the login name of the user. For a user account jimmy, the mailbox would be named user.jimmy.

Log into the cyrus admin tool and create a new mail user to match a local delivery name that postfix knows. Do this for each local account that receives mail, or postfix will throw errors.

$ cyradm localhost
cyradm> cm user.username
... repeat for all users ...
cyradm> quit

You can log into cyradm with user cyrus directly too, without using a cyrus system account (I prefer this way):

cyradm -u cyrus localhost

Additionally it's needed to add a mail alias for every mail account, because we're using users created in SASL, but not in system. So Postfix needs to know how to deliver mail.

Edit /etc/aliases adding for every mail account something like:

username: username

It's an alias for the same account. Later, execute “newaliases” command to compile the new aliases.

Cyrus and Postfix

Edit the file /etc/postfix/main.cf and add the following line to the file, removing or commenting out any other mailbox_transport = lines.

mailbox_transport = lmtp:unix:/var/run/cyrus/socket/lmtp

That transport will work just if you mount /var/run/cyrus inside Postfix's chroot, as explained before.

Create the lmtp group and add postfix to that group.

addgroup lmtp
adduser postfix lmtp

Fix the socket directory permissions and restart both mail servers.

dpkg-statoverride --force --update --add cyrus lmtp 750 /var/run/cyrus/socket
/etc/init.d/postfix restart
/etc/init.d/cyrus2.2 restart

Cyrus should now be linked to Postfix. All mail from Postfix will be handed off to the Cyrus server for delivery. This will fail if Postfix tries to deliver mail for a user Cyrus doesn't know about, so make sure that when new users are added to the mail system that the corresponding mailboxes are also added with cyradm.

Postfix and Multiple Domains

If the mail server will handle more than one domain but deliver all mail to local users, then the following information will configure this behavior. This is based on the guide at http://www.postfix.org/VIRTUAL_README.html.

Create the file /etc/postfix/virtual and populate it with entries like the following

user1@domain1.com  realuser1
user2@domain1.com  realuser2
user3@domain2.com  realuser1
# send all mail for domain3 to realuser3
@domain3.com       realuser3

The left side maps to the email address people will send mail to, and the right side maps to the local system account that mail will be delivered to (through Cyrus IMAP). Once this file has been created, it needs to be hashed for postfix to use, so run the postmap command to do this:

postmap /etc/postfix/virtual

Edit /etc/postfix/main.cf and add the following lines.

# Virtual Domain Settings
virtual_alias_domains = domain1.com, domain2.com, domain3.com
virtual_alias_maps = hash:/etc/postfix/virtual

This tells Postfix which domains to deliver to, and what file to use to check where to deliver the mail. It's pretty simple to get going. Reload Postfix again and things should work. Basic system setup should be complete at this point.

Troubleshooting

The most useful information for troubleshooting is found in the /var/log/mail.log file. Open a console and use the command

tail -f /var/log/mail.log

to watch mail server activity. Send a few test mails to an address on the server, and use the server to send test mails to other accounts. If errors occur use the information in the mail log file to try to track them down.

After things are working well it is a good idea to uncomment the line “smtpd_tls_auth_only = yes” and change the value of “smtpd_tls_loglevel” to something lower, such as 2.

Cyrus

When you are testing, sometimes you need to deactivate “duplicate supression” feature of Cyrus. Do it adding in /etc/imapd.conf the following:

duplicatesuppression: no

Spam and virus fitering

Spamassassin

aptitude install spamassassin spamc

No further tuning needed.

ClamAV

aptitude install rar unrar lha arj unzoo zip unzip bzip2 gzip cpio file lzop nomarch cabextract ripole \
rpm pax p7zip zoo ncompress
aptitude install clamav clamav-base clamav-daemon clamav-freshclam clamav-docs

Libclamav and other packages will be automatically installed.

Make sure the directive 'AllowSupplementaryGroups' exists in the file /etc/clamav/clamd.conf.

Amavis

aptitude install amavisd-new

Add the user 'clamav' to the group 'amavis':

adduser clamav amavis

Restart the daemons:

/etc/init.d/clamav-daemon restart
/etc/init.d/clamav-freshclam restart

If our hostname in /etc/hostname is not a FQDN (Fully Qualified Domain Name), that is to say it's a name of the type “server” instead of a name of the type “mail.domain.com”, we will have to modify the file /etc/amavis/conf.d/50-user, adding:

$myhostname = "mail.domain.com";

so that Amavis has the right value of the variable $myhostname.

In the same configuration file, add the following two lines in order Amavis to send quarantine spam/virus to mail accounts:

$virus_quarantine_to  = "virus-police\@mail.domain.com";
$spam_quarantine_to = "spam-police\@mail.domain.com";

Activate the use of ClamAV and the SpamAssassin spam filter in the Amavis config by editing the file /etc/amavis/conf.d/15-content_filter_mode and commenting out the following lines:

@bypass_virus_checks_maps = (
   \%bypass_virus_checks, \@bypass_virus_checks_acl, \$bypass_virus_checks_re);

@bypass_spam_checks_maps = (
   \%bypass_spam_checks, \@bypass_spam_checks_acl, \$bypass_spam_checks_re);

If you wanna spam being blocked and sended to spam-police account, edit /etc/amavis/conf.d/20-debian_defaults:

$final_spam_destiny       = D_DISCARD;

and comment the following line if you don't want Amavis to modify the subject of the emails marked as spam:

# $sa_spam_subject_tag = '***SPAM*** ';

If you wanna spam pass to user's accounts, edit /etc/amavis/conf.d/20-debian_defaults:

$final_spam_destiny       = D_PASS;

add to /etc/amavis/conf.d/50-user the following line changing the names as needed in your system, and comment the line who says about mail for spam:

@local_domains_maps = ([ ".$mydomain", 'sub.example.net', '.example.com', 'localhost' ]);
# $spam_quarantine_to = "spam-police\@mail.domain.com";

Finally, comment out the following line if you want Amavis to modify the subject of the emails marked as spam:

$sa_spam_subject_tag = '***SPAM*** ';

This way we let emails marked as spam pass and rely on the user using SIEVE filters (or the filters provided by his or her email client) to filter the spam by looking at the headers. Viruses are discarded.

Here you are my recommended configuration for allowed and banned attachments. You may want to evaluate the needs of your company and finetune it as needed. Comment out these lines:

qr'^application/x-msmetafile$'i,
qr'^\.wmf$',
qr'^message/partial$'i, qr'^message/external-body$'i,
[ qr'^\.(Z|gz|bz2)$'           => 0 ],
[ qr'^\.(rpm|cpio|tar)$'       => 0 ],
[ qr'^\.(zip|rar|arc|arj|zoo)$'=> 0 ],
qr'.\.(ade|adp|app|bas|bat|chm|cmd|com|cpl|crt|emf|exe|fxp|grp|hlp|hta|
inf|ins|isp|js|jse|lnk|mda|mdb|mde|mdw|mdt|mdz|msc|msi|msp|mst|
ops|pcd|pif|prg|reg|scr|sct|shb|shs|vb|vbe|vbs|
wmf|wsc|wsf|wsh)$'ix,
qr'.\.(mim|b64|bhx|hqx|xxe|uu|uue)$'i,
qr'^\.(exe|lha|tnef|cab|dll)$',

I configure next lines usually with following values (very strict spam filter):

$sa_tag_level_deflt  = -1000;  # add spam info headers if at, or above that level
$sa_tag2_level_deflt = 1.0; # add 'spam detected' headers at that level
$sa_kill_level_deflt = $sa_tag2_level_deflt; # triggers spam evasive actions
$sa_dsn_cutoff_level = 10;   # spam level beyond which a DSN is not sent

Modify the configuration of Postfix

Add these to /etc/postfix/master.cf:

smtp-amavis unix -      -       y     -       2  smtp
    -o smtp_data_done_timeout=1200
    -o smtp_send_xforward_command=yes
    -o disable_dns_lookups=yes
    -o max_use=20

127.0.0.1:10025 inet n  -       y     -       -  smtpd
    -o content_filter=
    -o local_recipient_maps=
    -o relay_recipient_maps=
    -o smtpd_restriction_classes=
    -o smtpd_delay_reject=no
    -o smtpd_client_restrictions=permit_mynetworks,reject
    -o smtpd_helo_restrictions=
    -o smtpd_sender_restrictions=
    -o smtpd_recipient_restrictions=permit_mynetworks,reject
    -o smtpd_data_restrictions=reject_unauth_pipelining
    -o smtpd_end_of_data_restrictions=
    -o mynetworks=127.0.0.0/8
    -o smtpd_error_sleep_time=0
    -o smtpd_soft_error_limit=1001
    -o smtpd_hard_error_limit=1000
    -o smtpd_client_connection_count_limit=0
    -o smtpd_client_connection_rate_limit=0
    -o receive_override_options=no_header_body_checks,no_unknown_recipient_checks

And add this to /etc/postfix/main.cf:

content_filter=smtp-amavis:[127.0.0.1]:10024

Restart Postfix:

/etc/init.d/postfix restart

Extra Software

In addition to basic mail service, it is also possible to provide webmail service using the SquirrelMail package, spam filtering with SpamAssassin, and server-side mail filtering with SIEVE.

Webmail

To use webmail, first set up Apache if it is not already working. To install Apache:

aptitude install apache2 libapache2-mod-php5

Since users will log in to SquirrelMail using a web form it is a good idea to enable SSL on the web server. Apache uses a certificate of a slightly different form than has been used in this guide so far. It combines the site certificate with the private key from the certificate request. To create this file copy the private key from newreq.pem and the signed certificate from newcert.pem into a new file /etc/apache2/ssl/apache.pem.

Enable the SSL module.

a2enmod ssl

Copy the default configuration file in /etc/apache2/sites-available/default to a new file in /etc/apache2/sites-available, such as default-ssl. Edit the file. Change the <NameVirtualHost *> line to <NameVirtualHost *:443> the <VirtualHost *> line to <VirtualHost *:443> and add the following lines to the file inside the VirtualHost directive:

SSLEngine on
SSLCertificateFile /etc/apache2/ssl/apache.pem

Edit the default site file and change the line <NameVirtualHost *> to <NameVirtualHost *:80> and the line <VirtualHost *> to <VirtualHost *:80>.

Now open the file /etc/apache2/ports.conf and add the following line to the file.

Listen 443

Enable the new SSL-enabled site.

a2ensite default-ssl

Restart Apache.

/etc/init.d/apache2 force-reload

Now that Apache is up and running, install the SquirrelMail package.

aptitude install squirrelmail

Run the configuration for SquirrelMail and adjust the settings for your system.

squirrelmail-configure

The configuration is quite straightforward. Once that is done try logging into the newly created squirrelmail site (The line Include /etc/squirrelmail/apache.conf may need to be added to /etc/apache2/apache2.conf). If you can log in to the site then SM is up and running.

SIEVE Filters

SIEVE is a simple yet powerful way to filter mail on the server side. In this setup it is part of the Cyrus IMAP server package, and runs on port 2000. I waited this long to introduce it, because I find the nicest way to build sieve scripts is with the AvelSIEVE plugin for SquirrelMail. First download the plugin from the SquirrelMail site and untar in in the SquirrelMail plugins folder. Copy the sample configuration to the real file and edit it to your configuration. If you're like me you didn't have to change anything.

Run the SquirrelMail configure script again and select plugins to view the list of available plugins. Type the number of the avelsieve plugin to enable it. Save your prefs and exit, and go back to your SquirrelMail web page to test it.

Click on the new filters link on the top bar. If you get an error about connecting, check /etc/cyrus.conf. If you get a connection refused error test sieve using sivtest. If you can connect to localhost but not your machines dns name, you'll have to edit that config file to fix the problem. I removed the “localhost” parameter from the sieve init line.

If you get a dialog that will let you add a new rule, congratulations. You're set. I usually create rules based on the X-Spam-Flag header to move mail to INBOX.Junk, and a few others to move mailing lists to their respective folders. Always make sure you save your rules before you leave the page though, or they will not take effect.

The nice thing about the sieve filters is that even though I set them up through squirrelmail, they run at the IMAP server level, and all mail you get through IMAP is filtered according to your rules.

Conclusion

That's pretty much it. The mail server can now send and receive mail, authenticate users, encrypt connections with SSL, and provide webmail and server-side mail filtering. Good luck with it.

Félix Molinuevo
FMSI Sistemas de Informática
Based on documentation written by Steve Block, 29 January 2005

Acknowledgements

This guide wouldn't be possible without the developers of all the software packages used here. I would like to extend my thanks to all of the developers. Thanks are also due to the Debian developers and package maintainers for their sensible setup of the base Debian system and its corresponding packages.

Thanks to Steve Block for teach me how to build my first mail server; and thanks to him again for show me DokuWiki, the wiki we're using now, simple, easy, and fast.

Bibliography

  1. Installing a Mail System on Debian Sarge: http://wiki.ev-15.com/debian:mail_system
  2. Postfix, SASL, Cyrus IMAP, MySQL, Amavis, Postgrey, SpamAssassin, ClamAV, Squirrelmail, Mailman, Mailgraph and Openmailadmin: http://openmailadmin.ossdl.de/wiki/howto/Postfix-SASL-Cyrus-MySQL-Amavis-Postgrey-SpamAssassin-ClamAV-Squirrelmail-Mailman-Mailgraph-OMA
  3. Postfix documentation: http://www.postfix.org/docs.html
  4. Tutorial: ISP-style Email Service with Debian-Sarge and Postfix 2.1: http://workaround.org/articles/ispmail-sarge/
  5. How to set up a mail server on a GNU/Linux system: http://flurdy.com/docs/postfix/
servidores/mail/mail_system_ubuntu_hardy.txt · Última modificación: 2011/07/14 08:04 por fmolinuevo